Any time that you are going to get 5D bends, you want to know about your options and the overall process. Getting involved ensures your specifications are met and that the bends are durable enough to last so you don’t have to worry about pipes breaking or any other issues.
The Extent of the Bend
When you need pipe bending in Houston, it’s important to look at the extent of the bend. 5D bends allow for a bend radius that is equal to five times the amount of the pipe’s diameter. This is one of the greatest bends there are and goes beyond a 3D or 4D bend. It’s not always required, but when it is, you have to find a company that is capable of delivering.
What They’re Good For
The 5D bends are good for a lot, and you want to know about these ahead of time. You can get the wider angle bend to avoid more pipe than necessary. It’s possible to improve flow and even reduce the number of connectors and fittings because of having the pipe bent to fit the necessary layout the first time around.
What Materials Can Be Used
It’s important to explore the materials that can be used. There are going to be issues with processing metal alloys in some instances. You have to be aware of these because if there is a tough environment, one alloy may not be ideal. To avoid issues with the pipes or anything else, it’s best to know about the material that will be used in the bends.
What Other Options Are Available
Some options exist with 5D bends. When you need them, you can discuss customization options with Bend It. This includes exploring the way the pipes will be finished on the ends as well as what they need to do within your operation.
How Bends are Made
There are several bending methods and it’s important to know what each one does. Cold bending, which is sometimes referred to as rolling, is done without the use of heat, which can help to maintain the structural integrity of the metal. Other methods includes hot bending, induction bending, and compression bending. You will want to familiarize yourself with the options to ensure the pipes are being bent using a method that works well for your project.