If You Need Hot Bending, Let Bend-IT, Inc. Handle the Job

When you need pipe bent at a short radius or a configuration not supported by normal bending methods, hot bending is typically the option of choice. Also, hot bending is used frequently for straightening and repairing. Power and process plants commonly need hot bending for their pipes. To have hot bending done right, you need a company that is equipped with the proper machinery and also has bending experts with the right amount of experience. You can find all of that and more when you come to Bend-IT, Inc. for hot bending.

At Bend-IT, Inc., we can do hot bending on low alloy steel AISI 4130 and AISI 4140. We take into account the depth to which these alloys will harden when hot bending. We can hot bend metals into coils and unique applications, when necessary. Also, we will go outside of the normal bending methods to obtain the desired shape, even for a tight radius. Our policy is to make it right and make it fast for our customers. A lot of industries rely upon us to deliver a product that is suitable for their purposes and there is no room for any errors. With the experience of President Tom Young (30 years+) and the pipe fabricators and bending experts (which averages about 15 years of experience), you can rest assured that we will turn out a good product each and every time. For the past 20 years, industries such as aerospace, oil-field, and petrochemical have come to realize that Bend-IT, Inc. is one of the most reliable pipe bending companies in business today.

Bend-IT, Inc. also utilizes cold bending in pipe rolling and structural shapes such as angle rolling : (leg in and leg out), channel rolling: (flange in, flange out and hard way), I-beam rolling: (hard way and easy way), flat-bar rolling: (easy way and hard way), square tube rolling and round tubes. We also provide fabrication services for heating and cooling coils for heat transfer usages such as sulphur tanks, steam lines, and sample coolers. We fabricate coils in all configurations that include helical coils, jacketed coils, serpentine coils, bayonet coils as well as custom fitted coils and more.

If you need someone to do hot bending for you, Bend-IT, Inc. is the only place you should consider. Call us now at 713-991-0745, fax us at 713-991-0827 or email us at . Tom Young, Bend-IT, Inc. president, will also listen to your comments through either email or telephone. You can reach him at the same number or send an email to .

 


Featured Video:

When Bending Partners Can’t Perform Quality Hot Bending, Look to Bend-IT, Inc. for Support

You may have one or more bending partners which you rely on for custom metal bending, but what happens if your company suddenly needs a pipe bent at a short radius or perhaps another bending configuration which your bending partners can’t support? If this is the case, then it may be time to look to a hot bending supplier that will be able to get the job done on time and with the highest amount of quality possible.

Learn more about Hot Bending

Click here


Bookmark and Share


Featured Video:

When Bending Partners Can’t Perform Quality Hot Bending, Look to Bend-IT, Inc. for Support

You may have one or more bending partners which you rely on for custom metal bending, but what happens if your company suddenly needs a pipe bent at a short radius or perhaps another bending configuration which your bending partners can’t support?

hot bending, pipe coiling, pipe bending companies, serpentine coils, bending stainless tube, cold bending,

Find out more about cold bending by contacting us today!


Bookmark and Share

Featured Article:

When Bending Partners Can’t Perform Quality Hot Bending, Look to Bend-IT, Inc. for Support

[Posted on Aug 15]

You may have one or more bending partners which you rely on for custom metal bending, but what happens if your company suddenly needs a pipe bent at a short radius or perhaps another bending configuration which your bending partners can’t support? If this is the case, then it may be time to look to a hot bending supplier that will be able to get the job done on time and with the highest amount of quality possible.

When bending partners can’t perform quality hot bending, look to Bend-IT, Inc. for support. This pipe bending houston expert can do hot bending on low alloy steel AISI 4130 and AISI 4140, and if metals need to be bent into coils or other applications, Bend-IT, Inc. should be able to complete the job. Although the capabilities of Bend-IT, Inc. are reason enough to take a closer look at a possible partnership, there are still more advantages of choosing this custom metal bending company. Many customers of Bend-IT, Inc. can point to the outstanding quality which this firm has consistently been able to produce. For 20-plus years, Bend-IT, Inc. has focused on quality, and this attention to quality has made customers very pleased with their bends and Bend-IT, Inc. very pleased with our stellar reputation.

On top of the high quality and hot bending capabilities, Bend-IT, Inc. has also been commended by many customers on our ability to deliver products on time all the time. Indeed, with fast turnaround times, Bend-IT has placed itself head and shoulders above other pipe bending companies. It should also be recognized that the entire team at Bend-IT, Inc. is dedicated to making the customer as happy as possible- this means we have an unbeatable work ethic which instills confidence and reinforces the notion that partnering with Bend-IT, Inc. for custom metal bending solutions is a prudent decision.

Choose Bend-IT, Inc. if your company is in need of a custom metal bender with hot bending capabilities! If you would like to learn more about our hot bending solutions or perhaps would like to learn more about our established firm, then simply continue to browse through the rest of the Bend-IT, Inc. website. Also feel free to contact us directly by phone or email if you have any questions regarding any of our high quality bending solutions or would like a quote or proposal.

Bookmark and Share

 

Read More Articles Below:

When Normal Bending Methods Won’t Suffice, Hot Bending from a Reliable Company is Needed

Look to Bend-IT for a Hot Bending Supplier with Sufficient Capabilities

 

 

When you need custom metal bending done right...and you need it done right now...your best bet is to Send It to Bend-IT!



Contact Bend-It, Inc.

Address:
6120 Nunn Street,
Houston, TX
77087



Email: //


TEL: 713-991-0745 (local or toll-free)

FAX: 713-991-0827 (local only)

FAX: 877-569-2363 (toll-free)




Request a Quote
Full Name*
Contact Email*
Contact Phone
Company
Details

Our Advantages


Bend-It, Inc. specializes in metal bending for a variety of industries. Some of our advantages include:

  • Fast Turnaround Times
  • Dependability
  • Outstanding Reputation
  • Heating and Cooling Coil Fabrication
  • Bending for Architectural Applications
  • Custom Oil Field Bending
  • Custom Pipe Bending

And More